}
首页>知识导航 > 水利基础 > 土木工程
发布时间 收起
展开更多
强制性标准 收起
中标分类 收起
展开更多
标准状态 展开
标准组织 展开
来源数据库 展开
相关度
订阅
至 收起
  • 服务由 质检出版社 提供

    GB/T 16457.1-2009 - 2009年04月23日 - 作废
    GB/T 16457的本部分规定了用于固定式或移动式切割机上, 机械操纵切割的超硬材料锯片钢基体的代号、尺寸和标记。  本部分适用于切割建筑物和土木工程材料(沥青,混凝土,天然或人造石材等)用锯片基体。
    部分材料尺尺寸工程机械基体建筑建筑物锯锯片木木工片基切割土土木工程硬
  • 服务由 质检出版社 提供

    JG/T 422-2013 - 2013年09月17日 - 现行
    本标准规定了土木工程用光纤光栅应变传感器(以下简称传感器)的术语和定义、产品结构、产品分类及型号命名、产品参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于土木工程用光纤光栅应变传感器的生产、使用和检测。
    土木工程光纤光栅传感器建筑仪器仪表
  • 服务由 质检出版社 提供

    JG/T 406-2013 - 2013年02月28日 - 现行
    本标准规定了土木工程用玻璃纤维增强筋的术语、定义、符号、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于隧道、边坡和基坑的锚固支护,盾构工作井的围护结构,连续配筋混凝土路面和桥面板结构等土木工程用玻璃纤维增强筋。 本标准不适用于预应力棍凝土结构用的玻璃纤维增强筋。
    土木工程玻璃纤维增强筋复合增强材料力学性能拉伸性能
  • 服务由 质检出版社 提供

    JG/T 421-2013 - 2013年09月17日 - 现行
    本标准规定了土木工程用光纤光栅温度传感器(以下简称传感器)的术语和定义、产品结构、产品分类及型号命名、产品参数、要求、试验方法、检验规则、标志、包装、运翰和贮存。 本标准适用于土木工程用光纤光栅温度传感器的生产、使用和检测。
    土木工程光纤光栅温度传感器仪器仪表建筑
  • 服务由 质检出版社 提供

    GB/T 16457.2-2009 - 2009年04月23日 - 作废
    GB/T 16457的本部分规定了用于手持式切割机上的超硬材料锯片钢基体的代号、尺寸和标记。  本部分适用于切割建筑物和土木工程材料(沥青、混凝土、天然或人造石材等)用锯片基体。
    部分材料尺尺寸工程基体建筑建筑物锯锯片木木工片基切割手土土木工程硬
  • 服务由 质检出版社 提供

    GB/T 39169-2020 - 2020年10月11日 - 现行
    本标准规定了金刚石圆锯片基体安装和固定孔的类型和尺寸、标记。 本标准适用于建筑施工和土木工程用金刚石圆锯片基体的安装和固定孔。
  • 服务由 质检出版社 提供

    GB/T 39140.2-2020 - 2020年10月11日 - 现行
    本部分规定了金刚石圆锯片用夹紧卡盘的类型和尺寸、要求、标记和标志。 本部分适用于切割建筑和土木工程材料、安装在固定式切割机、移动式切割机和手持式切割机上的金刚石圆锯片用夹紧卡盘。
  • 服务由 质检出版社 提供

    GB/T 26745-2021 - 2021年08月20日 - 现行
    本文件规定了土木工程结构用玄武岩纤维复合材料的分类、规格和标记,要求,试验方法,检验规则,标志、包装、运输与贮存。本文件适用于土木工程结构加固修复及新建结构用玄武岩纤维复合材料。
  • 服务由 WF 提供

    ISO/TR 21932-2013 - 2013年11月15日 - 现行
    ISO/TR 21932:2013 provides a compilation of terms and definitions of concepts related to both the construction and use of a building or civil engineering works, and the effect of such construction works on sustainability and sustainable development, as applied in the documents of ISO/TC 59/SC 17, Sustainability in buildings and civil engineering works.
    建筑物土木工程建筑施工工程作业施工工程定义环境可持续性寿命周期项目规划可持续性术语学
  • 服务由 WF 提供

    DIN EN 14933-2007 - 现行
    This European Standard specifies the requirements for factory made products of expanded polystyrene whichare used for frost insulation of roads, railways, trafficked areas, light weight fill for reduction of horizontal andvertical earth pressure and other civil engineering applications.The products are manufactured in the form of boards or blocks. The standard also covers specially cut shapedboards or blocks.The standard describes product characteristics and includes procedures for testing, evaluation of conformity,marking and labelling.The standard does not specify the required class or level of a given property to be achieved by a product todemonstrate fitness for purpose in a particular application. The classes and levels required for a givenapplication are to be found in regulations or non-conflicting standards.For applications where thermal resistance is required, products with a declared thermal resistance lower than0,25 m<(UP)2>. KNV or a declared thermal conductivity greater than 0,060 W/(m.K) are not covered by this standard.This standard does not cover in situ insulation products and products intended to be used for the insulation ofbuildings, of building equipment and industrial installations or products intended for acoustic insulation.
    防冻块材板材建筑物CE标记土木工程分类合格建筑施工材料定义设计尺寸检验绝缘材料绝缘件作标记材料特性聚苯乙烯生产控制特性质量保证抽样方法规范规范(验收)火焰表面传播监督(认可)测试导热性绝热材料隔热热防护热阻
1 2 3 4 5 下一页 GO
回到顶部