纺织行业知识服务平台
}
首页>知识导航 > 后整理技术 > 整理剂  > 防油污剂
发布时间 收起
强制性标准 收起
中标分类 收起
展开更多
标准状态 展开
标准组织 展开
来源数据库 展开
相关度
订阅
至 收起
  • 服务由 WF 提供

    ASTM F2059-2006 - 现行

    A standard test is necessary to establish a baseline performance parameter so that dispersants can be compared, a given dispersant can be compared for effectiveness on different oils, and at different oil weathering stages, and batches of dispersant or oils can be checked for effectiveness changes with time or other factors.

    Dispersant effectiveness varies with oil type, sea energy, oil conditions, salinity, and many other factors. Test results from this test method form a baseline, but are not to be taken as the absolute measure of performance at sea. Actual field effectiveness could be more or less than this value.

    Many dispersant tests have been developed around the world. This test has been developed over many years using findings from world-wide testing to use standardized equipment, test procedures, and to overcome difficulties noted in other test procedures.

    1.1 This test method covers the procedure to determine the effectiveness of oil spill dispersants on various oils in the laboratory. This test method is not applicable to other chemical agents nor to the use of such products or dispersants in open waters.

    1.2 This test method covers the use of the swirling flask test apparatus and does not cover other apparatuses nor are the analytical procedures described in this report directly applicable to such procedures.

    1.3 The test results obtained using this test method are intended to provide baseline effectiveness values used to compare dispersants and oil types under conditions analogous to those used in the test.

    1.4 The test results obtained using this test method are effectiveness values that should be cited as test values derived from this standard test. Dispersant effectiveness values do not directly relate to effectiveness at sea or in other apparatuses. Actual effectiveness at sea is dependant on sea energy, oil state, temperature, salinity, actual dispersant dosage, and amount of dispersant that enters the oil.

    1.5 The decision to use or not use a dispersant on an oil should not be based solely on this or any other laboratory test method.

    1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    分散剂效力环境工程瓶实验室实验室测试海洋污染石油污染油污染控制涡流试验方法测试防止水污染
  • 服务由 WF 提供

    ASTM F2465-2005 - 现行

    1.1 This guide covers performance criteria, requirements, material characteristics, and essential features for oil spill dispersant application systems. This guide is not intended to be restrictive to a specific configuration.

    1.2 This guide covers vessel-based spray systems employing single-point spray nozzles, including designs that have been based on or evolved from "fire-monitor" systems, and is not fully applicable to other systems such as spray boom/nozzle or aircraft systems.

    1.3 This guide is one of five related to dispersant application systems. The other four guides cover the design of boom and nozzle systems, spray system calibration, spray deposition measurements, and use of the systems. Familiarity with all five guides (listed in ) is recommended.

    1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    分散剂污染单石油污染防污染环境情况喷射污染控制点
  • 服务由 WF 提供

    ASTM F1737-2007 - 现行
    构架分散剂环境工程装置海洋污染喷管油污染油污染控制 反应喷雾咀喷涂设备 水污染防治
  • 服务由 质检出版社 提供

    GB 11505-1989 - 1989年03月25日 - 作废
    本标准规定了职业性急性三氯乙烯中毒诊断标准及处理原则。本标准适用于各种接触三氯乙烯的作业,如使用三氯乙烯清洗金属表面油污、干洗、用作溶剂或萃取剂以及三氯乙烯的生产等所发生的急性中毒。
    三氯乙烯诊断(医学)中毒急症治疗职业病
回到顶部