纺织行业知识服务平台
}
首页>知识导航 > 产品用纺织品 > 非织造布加固方法工艺 >  化学粘合 
发布时间 收起
展开更多
强制性标准 收起
中标分类 收起
展开更多
标准状态 展开
标准组织 展开
来源数据库 展开
相关度
订阅
至 收起
  • 服务由 WF 提供

    CNS 5609-1980 - 1980年05月24日 - 现行
    粘着剂粘合强度耐化学药品测定
  • 服务由 WF 提供

    UNI 5809-1966 - 1966年07月01日 - 废止
  • 服务由 WF 提供

    STAS 11081-1986 - 1986年06月01日 - 现行
  • 服务由 质检出版社 提供

    FZ/T 64004-1993 - 1993年03月19日 - 作废
    本标准规定了薄型粘合法非织造布的产品分类、技术要求、试验方法、检验规则、标志包装、运输贮存。
    薄型粘合法非织造布非织造布标准
  • 服务由 WF 提供

    BS 7795-1995 - 现行
    This British Standard specifies the coatings, dimensions, materials, lubrication and performance requirements for pre-applied adhesive type bolts, screws and studs with a micro-encapsulated chemical adhesive feature incorporated into the thread, when tested at an ambient room temperature between 15 ℃ and 30 ℃. It applies to bolts, screws and studs: a) with ISO metric coarse pitch M6 to M20 threads conforming to BS 3643 : Part 2 : 1981; b) with specific strength requirements conforming to either BS 6104 : Part 3 : 1981, BS 6105 : 1981 or BS EN 20898-1 : 1992, as appropriate; c) with threads of tolerance class 6g or 4h conforming to BS 3643 : Part 2 : 1981; d) for application into a mating component with a thread of tolerance class 6H conforming to BS 3643 : Part 2 : 1981; e) for use within the temperature range - 50 ℃ to + 150 ℃. The following are not covered in the scope of this standard: 1) capability of providing a pressure or liquid seal; 2) performance at temperatures outside the operating range; 3) performance of bolts, screws and studs for which a lubricated coating is not permissible.
    润滑胶粘连接螺栓螺钉螺纹紧固件紧固件胶粘剂覆层尺寸螺纹扭转试验螺柱扭矩
  • 服务由 WF 提供

    DIN EN ISO 20863-2005 - 现行
    This standard specifies a method for the determination of the bondability of heat activated and solvent activated stiffeners and toepuffs to upper and lining materials.
    皮革制品皮革最低要求粘合力适用性粘合性鞋头保护套材料鞋靴规范(验收)试验刚劲鞋底定义特性
  • 服务由 WF 提供

    JIS K6858-1974 - 1974年12月01日 - 现行
    この規格は,接着剤の耐薬品性を定められた方法で作製された標準の接着強さ試験片によって測定する方法について規定する。
    胶粘剂附着力试验耐化学性试验
  • 服务由 质检出版社 提供

    GB/T 7761-2003 - 2003年07月01日 - 现行
    本标准规定了测定硫化橡胶对刚性材料静态粘合强度的方法,本标准的试样是由一个圆柱形橡胶通过硫化粘合两个带圆锥形端面的刚性件组成。  试样的粘合是借助粘合体系实现的,此体系不仅包括刚性材料和胶料,而且还包括其他要素,诸如刚性件的薄合金镀层、化学处理、单一胶层或由底层胶和上层胶的双组分胶层。制备试样所用的粘合体系由使用者作出适当的规定,但对涉及到复杂粘合体系的各种破坏类型的表示方法仍可按本标准规定执行。  本标准适用于在标准条件下实验室内制备的试样,目的是为粘合体系及其组分(如胶浆和特殊胶料配合)、生产工艺等的研制和控制提供数据。在某些情况下由于粘合刚性件的横截面很小,尽管其模量很高但刚度很低,如橡胶和金属丝、帘线或薄片的粘合不适合使用本方法。
    合成橡胶橡胶天然橡胶刚性材料粘结强度试验圆锥形件法
  • 服务由 质检出版社 提供

    GB/T 14905-1994 - 1994年01月02日 - 作废
    塑料性能试验性能试验橡胶管管管管管
  • 服务由 WF 提供

    ISO 16525-8-2012 - 2012年03月01日 - 现行
1 2 3 4 5 下一页 GO
回到顶部