纺织行业知识服务平台
湿法抄造剑麻纤维无纺布工艺的探讨
Study on Wet-forming Process of Sisal Fiber Non-woven

本文以剑麻纤维为原料,采用湿法抄纸工艺抄造剑麻纤维无纺布.实验结果表明:与常压下用KRK磨浆机处理后直接得浆相比,剑麻化学浆的撕裂度、耐破度和耐折度更佳,更适宜作为湿法抄造无纺布的原料;在剑麻化学浆中添加聚酯纤维与添加PVA纤维相比,后者在增强剑麻无纺布的紧度、挺度、抗张和耐破方面优于前者;当PVA纤维添加量为10%时,剑麻纤维无纺布的耐破指数为2.37kPa·m2/g,抗张指数为173.65N· m/g,伸长率4.69%,Cobb值217.7g/m2,紧度0.989g/cm3,挺度1.589m·N·m.  In this paper, sisal fiber was used as raw material and sisal fiber non-woven was made by wet-forming process.The results indicated that the bursting, tearing and folding strength of caustic soda anthraquinone pulp were better than those of mechanical pulp, adding polyester fiber in sisal caustic soda anthraquinone pulp compared with the addition of PVA fiber, the latter was betten in the enhancement of sisal fiber non-woven density, stiffness, tensile and tearing strength than the former.When dosage of PVA fiber was 10%, the performance of sisal fiber non-woven were: burst index 2.37kPa·m2/g, tensile index 173.65N · m/g, elongation 4.69% , Cobb value217.7g/m2,density 0.989g/cm3, stiffness 1.589m·N·m.<br/>

作者单位: 广东省造纸研究所,广东广州510300
母体文献 广东省造纸学会2013年学术年会论文集
会议名称 广东省造纸学会2013年学术年会
会议时间 2013年12月10日
)
会议地点 广州
主办单位 广东省造纸学会
语 种 chi
分类号 TS174 TS102.22
在线出版日期: 2014年10月11日